Arrive and install inducer assembly and adaptor coupling. While installing I primed the coupling and inducer housing and then laid my bead of silicone conjoining the two. Verify operation of the newly installed in inducer motor with a running amperage of .72A. Verify no leaks coming from coupling or inducer motor. Furnace back to normal operation.
Fireplace and furnace maintenance 1st visit of 3 on service club membership Fireplace-Verify operation, remove glass and clean inside and out with non amoiniated glass cleaner, remove logset and vacuum up old ember bed, remove liner, remove burner and inspect for abnormal wear or corrosion, check and polish thermocouple and thermopile, clean pilot hood and spark ignition assembly, remove pilot orfice and inspect for obstruction, check burner orfice for obstructions, wipe down/ vacuum interior and below unit, check thermopile readings 429/215mV, check gas connections, check flu connections, reinstall all items and verify operation of burner and fan before leaving. Suggestions: To upkeep on maintenance of the fireplace as well as to have a 110V outlet installed into the unit for a fan motor. Furnace-Verify operation, change 14x24 filters, cannot check static pressures on ductwork due to install, check temperature rise across system 78-135F, check inducer motor amp draw-.7A, check