We appreciate the semi-annual inspections and knowing we receive prompt and knowledgeable service.
Performed AC tuneup on Trane system also replaced hot water tank with 75 gallon tank, cycled systems all is working upon completion
Performed for AC tuneup on Westinghouse system system is in good operating condition
Found inducer motor making noise upon arrival of a service call on furnace heating system. Removed and replaced inducer assembly and cycled system which is running properly upon completion of heating repair.
Performed no heat furnace repair on Bryant furnace heating system found blower motor Locke Road ramp removed and replaced and clean flame sensor cycled unit, unit is running properly after needed furnace heat repairs were made.
Performed no heat furnace repair on Bryant furnace heating system found blower motor Locke Road ramp removed and replaced and clean flame sensor cycled unit, unit is fully functional after furnace heat repairs.
Replaced humidifier pad on Lennox furnace heating system, after installation/heat repair was finished the unit began to work properly.
Service call on a Bryant furnace heating system found limit switch damaged igniter was also damaged and blower capacitor out of specs replaced all cycled unit running properly upon completion of the heating repairs.
Service call on a Bryant furnace heating system found ignitor bad and blower capacitor out of specs replaced both cycled unit running properly upon completion of these heating repairs.
Tune up performed on a Train furnace heating system, everything seemed to be in working order.
Routine tune up performed on a Westinghouse furnace heating system. Technician ran the unit and everything was working properly.
Went out on a no heat furnace repair call Found dirty air filter causing it not to operate properly on Westinghouse furnace removed filter and replaced. Upon completion of this furnace repair the unit regained proper function.
Found high limit switch damaged on Bryant furnace heating system due to air filter being clogged. Performed furnace heat repair cycled system unit is running upon completion.
Annual tuneup on a Nordyine furnace heating system. Technician replaced water valve to the humidifier pad, no other heating repairs were needed. Unit began working immediately.
Lennox furnace heating system not working properly, after a repair to the flame sensor the heating unit was working properly.
After answering customer's call it was determined that the repair needed was to replace indoor about Evan coil and electric heat package on Goodman system.