airnow needs to make maintenance renewal price cheaper for longtime customers
Overall Experience
Quality
Price
Convenience
Very pleasant and knowledgeable. Helpful with info as well.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Company was very thorough and thorough with their explanation of what they did and what may be needed. I felt l comfortable with the gentlemen that came!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Excellent service man,,, thank you,,, it seems like air now is finally getting some good workmen ... !!!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
He was wonderful explained everything and we enjoyed having him here
Overall Experience
Quality
Price
Convenience
Routine maintenance this time but explanations about findings and recommendations help make decisions easier. Not the cheapest visit today but hopefully equipment will last longer as a result.
Overall Experience
Quality
Price
Convenience
Great service. Daniel spent so much time and fixed our problem and offered a solution to prevent further issues. Appreciated his time and concern.
Overall Experience
Quality
Price
Convenience
I was very happy with the system maintenance done today. I will continue to have the central air conditioning cleaned and checked regularly to make sure it lasts as long as possible.
Overall Experience
Quality
Price
Convenience
Daniel is professional, knowledgeable and efficient. He did a good job.
Overall Experience
Quality
Price
Convenience
You technician was courteous and helpful. I am surprised that I had to pay for labor when I have a contract with you. What is that contract for? I was thinking of upgrade my plan, but forget it. if each time I call I have to pay arm and a leg. The air conditioner was serviced Saturday and today , five days later , it went bad and I am charged for labor. Not good....
Overall Experience
Quality
Price
Convenience
Brandon is a very bright technician. I appreciate the information. He’s a great representative of your company
Overall Experience
Quality
Price
Convenience
AH Cleaned and treated drain line Looked over low and high volt components Got temp split and static pressure readings Checked heat Checked Uv bulb good till next visit Replaced filter 16x20x4 Replaced sm pan treatment CONDENSER Checked pressures Looked over low and high volt components Rinsed coil RECOMMENDATIONS 16x20x4 replacement filter UV replacement bulb SURGE PROTECTORS PROTECT SYSTEMS FROM SIGNIFICANT POWER FLUCTUATIONS The freeze Protection Lockout Switch, MODEL CPLS, is a temperature sensing control, used to act as a safety against Evaporator Coil freeze up. It is designed to mount on the surface of a 3/4" or 7/8” suction line. Electrically, it is wired in series with the "Y" lead from the thermostat or zone control panel, to the compressor contactor coil or relay. The switch breaks (opens) shutting off the compressor when the temperature of the pipe drops below 37 F. The switch will reset (close), restarting the compressor when the temperature of the pipe rises
AH Cleaned and treated drain line Looked over low and high volt components Got temp splits and static pressure readings Replaced filter Replaced pan treatment Uv bulb good till next visit Checked heat CONDENSER Checked pressure Looked over low and high volt components Shampoo and rinsed coil Recommended start assembly RECOMMENDATIONS Start assembly RUN CAP, CONTACTOR parts and labor warranty $99 deductible Assurance plus renewal UV replacement bulb Filter replacement The freeze Protection Lockout Switch, MODEL CPLS, is a temperature sensing control, used to act as a safety against Evaporator Coil freeze up. It is designed to mount on the surface of a 3/4" or 7/8” suction line. Electrically, it is wired in series with the "Y" lead from the thermostat or zone control panel, to the compressor contactor coil or relay. The switch breaks (opens) shutting off the compressor when the temperature of the pipe drops below 37 F. The switch will reset (close), restarting the compre
No Cool service call performed today. Checked system operations, blower motor stuck running, checked voltage between common and fan with 28v active, removed stat from wall and tested voltage again, 0v active. Thermostat will need to be replaced. Client stated he will replace thermostat himself.
ESA 1-2 x2 systems maintenance performed today. Client doesn’t want to proceed with any recommendations as of today. Checked system operations, tightened electrical connections, amp draws within range, air filter to be replaced by client, installing a UV Lamp helps to reduce biological growth in the air handler, drain pan treatment helps to reduce slime build up once the drain line is cleaned out thoroughly, rinsed/deodorized indoor coils, flushed drain line with green cleaner, water and pulled vacuum. Client is aware the ductwork needs some improvements for optimal cooling in the guest side of the home. System operations normal.
Diagnosed system found thermostat set to heat but was cooling at the same time and filter needed changed. Reset thermostat and programmed, system had a 5kw heat element. After programmed thermostat the heat started heating properly and cooling. System is working fine at this time.
Spoke with client over the phone (virtual visit). I walked her through the ‘power loss’ start up menu with system back up and running.
Forgot to rinse Condesnser coil on regular scheduled maintenance Returned to rinse coil
MINI Cleaned and treated drain line Sprayed filter out with water and reinstalled Got temp splits Looked over low volt connections Sprayed coil and rinsed with water CONDENSER Looked over low and high volt components Checked pressures RECOMMENDATIONS Renewal assurance plan 1 year of membership with 2 visits a year Renewal assurance lte 1 year of membership with 1 visit a year Condesnser coil cleaning tear down of outdoor system to properly clean coil
Home owner says there is no problem at this time. Thomas changed the txv last time he was here.
Replace the start assembly and repair all burnt or loose wires to return the system to manufacturer's specifications. Added pan treatment to drain pan, flushed drain, homeowner changes filters, all operations normal.
Replace the start assembly and repair all burnt or loose wires to return the system to manufacturer's specifications. Added pan treatment to drain pan, flushed drain, homeowner changes filters, all operations normal.
Replace the start assembly and repair all burnt or loose wires to return the system to manufacturer's specifications. Added pan treatment to drain pan, flushed drain, homeowner changes filters, all operations normal.
Replace the start assembly and repair all burnt or loose wires to return the system to manufacturer's specifications. Added pan treatment to drain pan, flushed drain, homeowner changes filters, all operations normal.
Arrived to do a maintenance on a Bryant system vertical in closet. I cleaned and flushed the drain line with water and cleaner. I checked the electrical system. I changed the filter, 20x20x4, owner has there own filters. I recommended the following to keep the system running almost like new: The surge protector is to keep from burning up the board or electrical on the condenser. If you get high power surges or lightning strikes in the area it may burn up the electrical on the condenser. The freeze protector is to keep from freezing up the coil in the air handler. If the blower fails or no air flow over the coils it will freeze the coil in the air handler. The pan treatment is to keep the algae out of the drain line and pan. The Uv light is to keep the biological growth out of the air handler. And the air that you breath every day. The system is working great at this time. Thanks for using air now for all your air conditioning needs. Arrived to do a maintenance on a Bryant