9539 s 560 w
Sandy, UT 84070
8012855244

Local Reviews
for lehi, ut


Job Locations
for lehi, ut

Chris K.

Chris K. Job Checkin

Repair carrier air conditioner

Repair carrier air conditioner

Chris K.

Chris K. Job Checkin

Replace water heater and tune up air conditioner


Austin  K.

Austin K. Job Checkin

tempstar air conditioner tune up


Chris K.

Chris K. Job Checkin

Installing a American Standard powered humidifier

Installing a American Standard powered humidifier

Heath K.

Heath K. Job Checkin

Going to work on a furnace not heating! I found the flame sensor was extremely dirty and wasn’t letting the furnace turn on and needed a tuneup also! Performed tune up and found gas pressure was set way to low also so I adjusted it to the correct pressure and checked wiring and amp draws, cleaned burners and cabinet and blower motor! Running great now!


Heath K.

Heath K. Job Checkin


Chris K.

Chris K. Job Checkin

Armstrong air furnace and air conditioner not working freezing up

Armstrong air furnace and air conditioner not working freezing up

Chris K.

Chris K. Job Checkin

Armstrong air furnace and air conditioner not working freezing up

Armstrong air furnace and air conditioner not working freezing up

Chris K.

Chris K. Job Checkin

Armstrong air furnace and air conditioner not working freezing up


Chris K.

Chris K. Job Checkin

Armstrong air furnace and air conditioner not working freezing up


Scott M.

Scott M. Job Checkin

2 system tune up on Tempstar equipment. A/C and furnace tune up for new homeowners.

2 system tune up on Tempstar equipment.   A/C and furnace tune up for new homeowners.

Jesse R.

Jesse R. Job Checkin

Customer says his Bryant air conditioner is not working.


Jesse R.

Jesse R. Job Checkin

Performing an air conditioner tune up on a Bryant air conditioner.

Performing an air conditioner tune up on a Bryant air conditioner.

Jesse R.

Jesse R. Job Checkin

Preforming an air conditioner tune up.


Trent j.

Trent j. Job Checkin

Raise furnace. Replace and increase R/A Duct to 24x10. Replace and increase R/A drop to 25x12. Install accu clean, variable speed motor, 5 heat runs and 1 R/A. Check A/C for leaks.

Raise furnace. Replace and increase R/A Duct to 24x10. Replace and increase R/A drop to 25x12. Install accu clean, variable speed motor, 5 heat runs and 1 R/A. Check A/C for leaks.