Check thermostat check blower motor check filter customer supply. Check condensate drain and pump working. Found condensate drain was clod blow it out. Supply air 47* return air 66*. Check disconnect check capacitor. Found capacitor was reading 37+3+440 and recommended is 40+3+440. Customer said he will work it until it go. Cycle unit on to check compressor and fan motor working. Wash and clean condenser coil. Outdoor temperature 75*. At times of dispatch unit is working. NB there no model or serial no present on unit.
$119.95 Furnace Tuneup. Replace 2-Stage 90% Inducer Assembly And 7.5+370 Run Cap. T-Stat, 52 Ohms HSI, Flame Sensor, Electric, 1.5†& 3.5†W.C. Gas Valve, Drain Trap, Blower Motor, #201Sg, UV Light, 17†Outside, “Humidifier†Hum-Stat, Bypass Damper Open, #10Wp. Water Valve, Solenoid, Electric, Drainline, Cycled Unit Clean And Check.