Arrived on time. Completed the service. Very good experience overall.
Kevin took extra time to make sure he answered our questions and the repair was great!
Excellent service. Arrived at scheduled time. Very friendly and professional.
As usual, I received great service from First Call Heating and cooling!
Performed Bryant furnace and ac installation. Configured all system settings to relate to customer's specific home needs. Tested system and ensured all proper functions. Systems are both heating and cooling well!
furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Arm strong Furnace and A/C tuneup: checked thermostat and verified operation, inspected heat exchanger, checked inducer, blower, motor amperage in furnace, checked fan and compressor motor amperage in condenser, cleared all drain lines, cleaned condensate trap and flame sensor, checked ignitor and temperature readings, checked all wire and electrical connections, checked gas pressures, checked capacitor and contactor, checked refrigerant levels, cleaned condenser coils and unit.
Carrier furnace is not heating due to a failed gas valve. Replaced part and verified operation. System is now running and heating well again!
Performed Furnace Tune up, system is running and heating well! Everything is up to manufacture specs.
Trane Furnace is running and heating properly with no issues to report. Cleared pressure switch tubing and cleaned flame sensor (see attached documents for more details).
furnace tuneup, maintenance, and inspection. Checked thermostat, cleaned condensate trap, checked air filter, cleared drain lines, cleaned flame sensor, checked igniter, inspected burners and heat exchanger, checked and cleaned intake pipe, checked blower and inducer motor amps, checked and adjusted gas pressure, checked all wire and electrical connections, checked temperature rise, and cleaned unit. System running and heating well!
Performed (2) Furnace Tuneups, both systems are running and heating well. Everything I checked is up to manufacture specs.
Pushmatic breaker was replaced. Unit is cooling well at this time.
Just completed an install quality check on a Bryant two stage furnace and 17 SEER air we installed, the guys did a great job and the customer is happy!
Just completed an install quality check on a Bryant Evolution modulating system we installed, the guys did a great job and the customer is happy!
Performed Bryant furnace and ac installation. Configured all system settings to relate to customer's specific home needs. Tested system and ensured all proper functions. Systems are both heating and cooling well!
Performed AC diagnostic, system is completely frozen and most likely low on refrigerant. Unit is 30+ years old will quote them new units.
Lennox ac leaking water due to a plugged drain fitting. Cleared fitting, drained excess water, and verified operation. System is now draining and cooling as normal