I went to the customer's home to service a Trane AC unit. I found the thermostat was not connecting to the system. I replaced the thermostat and added wires back to the board. I ran the system and it is all operational at this time.
I performed scheduled maintenance on Carrier 13 SEER 3 Ton Air Conditioning Unit. inspected the evaporator coil. I checked the temperature difference across the coil. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored the system. Operating normally at this time.
I completed scheduled maintenance tune-up & safety check on Carrier 16 SEER 2.5 Ton Air Conditioner. I visually inspected the unit. Checked voltages, amps and pressures. I rinsed the condenser coils with water. Cycled and monitored system. All operating normally at this time.
Upon arrival I completed the Install Inspection and found everything within the manufactures specifications. The system is operational upon departure.
I performed Scheduled Maintenance Tune-Up & Safety Check on Five Star 13 SEER 2.5 TON Air Conditioner. I visually inspected the unit. Checked voltages, amps and pressures. I inspected the evaporator coil. I checked the temperature difference across the coil. Inspected Furnace. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored system. All operating normally at this time.
Upon arrival, I found condenser fan motor seized up, was able to spin and get it to let loose. I gave customer quote for new condenser fan motor with new blades and capacitor. Customer will review options and get back to us. Trane AC operational at this time.
During a tune up on a Carrier Gas Furnace, I cleaned the flame sensor and changed the filter with customer provided filter. All readings are within manufacturers specifications at this time. Furnace is running at departure.
I found low voltage fuse blown, I replaced fuse and cycled system on. The heat pump tripped on high pressure. I found dirty filter was restricting air flow and causing high pressure. Customer will replace filter to keep Carrier system from overheating.
I found that the inducer motor is not coming on and will need replaced before moving forward. At this point, due to age and condition of system I do not suggest putting any more money into this unit and suggest replacing. Customer would like to move forward with replacement of 1994 Lennox gas furnace.
I returned to adjust return drop and address high discharge temperature. I made some adjustments and the Carrier 80% 70,000 BTU Gas Furnace is working properly at this time.
I performed an installation inspection on a Carrier 80% 70,000 BTU Gas Furnace and a Carrier 16 SEER 2.5 Ton Air Conditioner. Everything working within manufacturers specifications at this time.
I came out today to perform a whole house duct cleaning after we installed a new full Carrier system in the house.
I am Performing our Five Star Tune-Up & Safety Check on a 2009 Carrier Gas Furnace. All readings were within manufacturer's specifications, unit operating properly at this time.
I am Performing our Five Star Tune-Up & Safety Check on a 2009 Carrier Gas Furnace. All readings were within manufacturer's specifications, unit operating properly at this time.
