Jake answered all of our questions, provided great customer service, and addressed all of our needs.
Wes did an amazing job and completed the project on time and within our budget
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Found blower motor to be leaking oil and recommend replacement. Also recommend a new transformer, surge protector and electronic air cleaner. Installed electronic air cleaner and surge protector. Tested operation. Took vent cap off combustion air. Will follow up with customer regarding home advisor appointment.
Perfomed mini split precision tune up. Cleaned outdoor unit using coil cleaner and water. Ensured proper cooling with temperature splits. Cleaned filters of units and installed disinfectant into upper level unit. Both units cooling properly at this time. Comfort matters does not do high velocity heating and cooling. We recommend homeworks for that field.
Customer explained RTU was not holding temperature. Evaluation revealed filter door had been blown off of unit. This was allowing hot humid outdoor air to be sucked into system and refrigeration could not condition air. Reinstalled filter door and tabs to hold door on. Unit operating well at this time.
Performed seasonal precision tune up on cooling units. Chemically cleaned condenser coils, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Overall systems are operating as they should.
Return visit to removed water heater fitting that is leaking. Replaced with new peg line and tested operation. As of now everything is up and operating properly and there are no more water leaks.
Found slow leak coming from pex to copper connection. Customer signed up on membership annual. Office is coordinating to set up a time to come back to fix the problem.
Arrived to find thermostat frozen and not responsive. RTU 2 was not running when I went on the roof and had an error code for ignition lockout. I tested all components and everything was testing where it should be. It’s possible that board or gas valve are having intermittent issues but everything worked as it should when I reset power. Installed T4 thermostat and tested operation, no issues.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
I diagnosed a rooftop unit that was low on refrigerant
I performed annual maintenance on a Daikin air conditioner
I diagnosed a low voltage short on a Carrier air conditioner
Daikin air conditioner maintenance. Precision tune up on Daikin air conditioner
I replaced a failed blower motor on a Bryant rooftop unit