Summer AC Maintenance Performed Upon arrival system is working and operational. I began my maintenance at the outdoor condenser by breaking it down and cleaning with water and coil solution, removing dirt and debris. I inspected electrical components for wear and tight connections. I checked refrigerant pressures and charge. I tested system amperages. I then proceeded to the indoor furnace unit. I measured temperature splits. I checked condensates for proper drainage and safety. Filter was changed. Inspected electrical to ensure tight connections and monitor wear. Inspected blower compartment for dust and dirt as well as proper balance. Upon inspection of indoor heat pump I found the blower wheel to be heavily laden with dirt and debris, recommend a blower housing pull and clean be performed. Upon speaking with home owner in regards to ducting and improving air flow to home, Mateo will be out on Wednesday the 15th between 11-1pm for a quote on new duct work. Upon departure system is