Upon arrival performed maintenance. Indoor motor is in good condtion. Blower wheel is beginning to collect dust. Evap coil dirty. Flame sensor was cleaned. Insulation levels are good. Ducting and seals are good and have duct sealant at joints. Secondary motor control is low in range. Client approved to go for best option, office to schedule to come back and performed upgraded filtration cabinet. Circuit board and electrical connections good. Temp rise split good. Filter was replaced. System was reset tested and fully functional upon departure.
Upon arrival performed maintenance. Indoor motor is in good condtion. Blower wheel is beginning to collect dust. Evap coil dirty. Flame sensor was cleaned. Insulation levels are good. Ducting and seals are good and have duct sealant at joints. Secondary motor control is low in range. Client approved to go for best option, office to schedule to come back and performed upgraded filtration cabinet. Circuit board and electrical connections good. Temp rise split good. Filter was replaced. System was reset tested and fully functional upon departure.
Upon arrival performed maintenance. Indoor motor is in good condtion. Blower wheel is beginning to collect dust. Evap coil dirty. Flame sensor was cleaned. Insulation levels are good. Ducting and seals are good and have duct sealant at joints. Secondary motor control is low in range. Client approved to go for best option, office to schedule to come back and performed upgraded filtration cabinet. Circuit board and electrical connections good. Temp rise split good. Filter was replaced. System was reset tested and fully functional upon departure.
Upon arrival performed maintenance. Indoor motor is in good condtion. Blower wheel is beginning to collect dust. Evap coil dirty. Flame sensor was cleaned. Insulation levels are good. Ducting and seals are good and have duct sealant at joints. Secondary motor control is low in range. Client approved to go for best option, office to schedule to come back and performed upgraded filtration cabinet. Circuit board and electrical connections good. Temp rise split good. Filter was replaced. System was reset tested and fully functional upon departure.