41638 Eastman Dr. Suite B
Murrieta, CA 92562
(888) 659-2665

Job Locations
for winchester, ca


Map of Winchester CA
Luis M.

Luis M.


Job Checkin

Upon arrival performed diagnostic. Found system non responsive on cooling mode. Secondary control was out of range causing compressor and fan motor to not kick on. Replaced moto control got system going. Refrigerant levels very good. Found compressor to be pulling 42.7 amps off the start, added booster kit amperages down at 22. Fan motor was leaking oil. Customer wants to get some time out of the system before replacing, so chose a full condenser rebuild. Brand new primary power distributor, old one was pitted and burned badly at contacts. Programmed high efficiency slow start motor for 825 rpm. System was reset tested and fully functional upon departure.


Map of Winchester CA
Luis M.

Luis M.


Job Checkin

Upon arrival performed diagnostic. Found system non responsive on cooling mode. Secondary control was out of range causing compressor and fan motor to not kick on. Replaced moto control got system going. Refrigerant levels very good. Found compressor to be pulling 42.7 amps off the start, added booster kit amperages down at 22. Fan motor was leaking oil. Customer wants to get some time out of the system before replacing, so chose a full condenser rebuild. Brand new primary power distributor, old one was pitted and burned badly at contacts. Programmed high efficiency slow start motor for 825 rpm. System was reset tested and fully functional upon departure.


Map of Winchester CA
Luis M.

Luis M.


Job Checkin

Upon arrival performed diagnostic. Found system non responsive on cooling mode. Secondary control was out of range causing compressor and fan motor to not kick on. Replaced moto control got system going. Refrigerant levels very good. Found compressor to be pulling 42.7 amps off the start, added booster kit amperages down at 22. Fan motor was leaking oil. Customer wants to get some time out of the system before replacing, so chose a full condenser rebuild. Brand new primary power distributor, old one was pitted and burned badly at contacts. Programmed high efficiency slow start motor for 825 rpm. System was reset tested and fully functional upon departure.


Map of Winchester CA
Luis M.

Luis M.


Job Checkin

Upon arrival performed diagnostic. Found system non responsive on cooling mode. Secondary control was out of range causing compressor and fan motor to not kick on. Replaced moto control got system going. Refrigerant levels very good. Found compressor to be pulling 42.7 amps off the start, added booster kit amperages down at 22. Fan motor was leaking oil. Customer wants to get some time out of the system before replacing, so chose a full condenser rebuild. Brand new primary power distributor, old one was pitted and burned badly at contacts. Programmed high efficiency slow start motor for 825 rpm. System was reset tested and fully functional upon departure.