Arrived at the customers home. I spoke with the homeowner about his hose bib that he wanted replaced because it wouldn’t stop dripping even when shut off. I provided him with an estimate to replace it. He signed off on the estimate. I began by shutting water off at the meter. After that I drained down the cold water lines. Then I cut out the pre-existing hose bib. Once I had the old one cut out I fabricated the new one in, and soldered it into place. After that I slowly turned water back on at the meter and checked the new installation for leaks. No leaks were found. Thank you for choosing CPI Plumbing and Heating!