Explain what was going on with my furnace and what he did
Working on the customer's Frigidaire. Found a coolant leak, replaced a seal, re-charged, good as new!
Working on the customer's Frigidaire. Found a refrigerant leak, replace a seal, good as new.
"I'm at this customer's home in Pickerington to check out his non-working Carrier furnace.
I did a half install on a Five Star Air Conditioner unit. This install included a new Air Conditioner Condenser, A-Coil, line set or flush, Pad, Outdoor Disconnect, Removal of Old Equipment.
I provided a Full Install on a Five Star Electric Furnace, Honeywell Programmable thermostat and a Five Star Heat pump. A one year Scheduled Maintenance agreement was also given with this install.
After removing the air conditioner, I installed a Five Star 13 SEER 2.5 Ton Air Conditioner. Cycled and monitored the system. Operating normally at this time. Included with the installation is a free 1 year service maintenance agreement.
I installed a Carrier 80% 90,000 BTU Gas Furnace and a Carrier 13 SEER 3 Ton Air Conditioner. System is set and customer is ready for the cooling season.
I installed a Carrier 13 SEER 4 Ton Air Conditioner. System is set and customer is ready for cooling season.
I installed a Carrier 96% 60,000 BTU Gas Furnace and a Carrier 13 SEER 2.5 Ton Air Conditioner. System is installed and customer is all set for the cooling season.
I installed a Carrier 96% 60,000 BTU Gas Furnace with a Carrier 16x25x4 media cabinet and a Carrier 16 SEER 3 Ton Air Conditioner. Everything is operating as intended at time of departure.
I installed a Carrier 96% Two-Stage 60,000 BTU Gas Furnace and a Carrier up to 17 SEER 2 STAGE 3 Ton Air Conditioner with an Aprilaire 600M humidifier and a Honeywell T10 thermostat. All readings are within manufacturers specifications at this time.
I installed a Carrier 96% Two-Stage 80,000 BTU Gas Furnace and a Carrier 16 SEER 3 Ton Air Conditioner. Everything is working within manufacturers specifications at this time.
I installed a Five Star 95% 60,000 BTU Gas Furnace. Everything is operating within specifications at this time.
I found heavy corrosion and hot spots in the heat exchanger and I found exhaust filled with ice and it had become disconnected. I secured concentric piping and system fired and ran without issue. No other issues found.