Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Ripped out old 90% natty gas’s furnace and braced up ac coil with drive slid old furnace out and slid new 90% furnace in same place re attached Return duct and made supply transition in between furnace and coil, reattached PVC 2 inch venting to new heater reattached three-quarter inch PVC drain line installed new condensation pump on isolation pads and tested wired and pump in the series, also hooked back up humidifier installed one T6 thermostat and program taped and seal all holes tested for gas leaks found no bubbles at time of completion, tied in horizontal drain kit and pumped into condensate pump adjusted gas pressures and set up dip switches set cfm airflow to D 2-1/2 ton ac unit, install new vinyl tubing ran tubing to inside on sewer pipe with barb fittings and hose clamp on both ends tested for leaks,