Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Installed a new American standard gas furnace with a American standard coil, as well as a American standard ac unit. Inside we changed the return boot and modified for a April air 4310 media filter, I re connected gas lines and vinyl lines, new junction box was added and bx wire was ran to a new 4x4 box with a switch and outlet. A new condensate pump was installed as an ez trap and both were wired in for water protection. We installed a new April air humidifier and re connected the water line and wired in to hum terminals on board. New drain line was added. We re connect the venting right at the unit with 2 couplers and a short piece of 2 inch PVC. A new plenum was needed all the way up to the duct work for connection. Ducts were sealed and taped. A new lineset was ran and filter dryer installed inside. System was triple evacuated and vacuumed down to 222 microns and held for 20 minutes charge was adjusted and pressures checked out ok new whip disconnect and thermostat wire was install