Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Reclaimed 410-A Refrigerant in system and disconnected and removed the Compressor and Filter dryer. Installed a new Scroll Compressor and new Filter Drier. Brazed Compressor and filter drier using Nitrogen, and pressure tested system with 150 PSI of nitrogen. Evacuated system to below 500 Microns and weighed in manufacturer charge. Installed an Inline Surge Protector on the Outdoor Disconnect Box. Put system in operation and adjust Refrigerant levels as needed. While onsite, performed AC Tune Up on system. Replaced 16x20x1 Air Filter. Cleaned drain Line and Condensation Pump. Inspected Electrical Components on Indoor and Outdoor Units. Measured and adjusted refrigerant charge during Compressor replacement. 06/17/2020 - Arrived at customers home to test system pressures and super heat and subcool. Super heat around 40 with no subcool. Temp test of reversing valve showing almost a 5 degree temp difference. Switched system to Heating to exercise reversing valve. Ran in Heating for