Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Evacuated and removed all outdoor condenser unit disconnect box wep and line set, Also removed old pad that unit was on top off, ripped out old heat pump air handler return box and return trunk, as well as vinyl tubing for the condensate pump also disposed of condensate pump itself. Installed new equipment in same spot air handler electric heat kit install new return drop and 4 inch filter with new return box. Ran Set from indoor to outdoor units breezed in and pressurize the 300 psi system held for 15 minutes and never dropped then put on to vacuum pump and pump down to 250 µm. Installed new supply Plenum above the heat pump unit.Installed new easy trap vinyl tubing to where it is now discharging inside the building into a sewer pipe wired and easy trap breaking or from the Thermostat breaking R terminal from thermostat. Completed all line voltage and low-voltage wiring. Sealed up any holes with correct tape. Installed new T4 thermostat and programmed for heat pump set threshold at