Have any feedback for us? We'd love to hear it! Call us at (205) 417-2030 and let us know how we are doing.
We knew exactly who was coming and Johnny was right on time. Very pleasant and professional. I wish more companies were as reliable and customer oriented.
Performed single system tune up. Inspected all electrical, checked pressures in cooling, cleaned condenser coil. Cycled system through heating and cooling. System is functioning properly upon departure.
Arrived on call no cooling upon inspection found a blower motor going out due to bad bearings, will have to call Monday about part and availability. Customer is going to get the motor and replace.
These are the items needed to ensure the proper operation and comfort of your home.
Found bad nest tstat. Replaced with easy read and system is functioning as it should. These are the items needed to ensure the proper operation and comfort of your home.
4679 approved via Greensky will be returning Tuesday to run return flex spot wrap duct system and clean blower wheel, equipment operating upon departure
Bad pressure, igniter, and bad control board, also bad reversing valve, I tuned it over.
Arrived on no cool call found 2 units not working found unit number 1 not working due to power disconnect had accidentally been turned off, turned back on and checked operation Found unit number 4 had low voltage short, I corrected short and checked operation Also filter size for unit 2 too take 2-16x30 Setup time to do first ptu on 5/11/20 9-11am
Completed a fcc tune up, cleaned system, performed a maintenance inspection and everything is operating properly.
Performed a precision tune up , cleaned unit, performed a maintenance inspection and everything is operating properly.
Performed a fcc tune up, cleaned system, performed a maintenance inspection and everything is operating properly.
Performed fcc tune up , cleaned system, completed maintenance inspection and everything is running properly.
Diagnostic test was done for system not cooling properly and found that the secondary motor control was bad and it has been replaced.
Diagnostic test was done on the Goodman system for not cooling properly due to bad secondary motor control. The secondary motor was replaced and it is working properly.