- Replacement of the leaking compressor - Recharge the unit with refrigerant - Installation of a new filter dryer
Today James revisited the home to provide a second perspective on the diagnosis of the AC unit. The system has a refrigerant leak at the compressor connection. To repair the leak the compressor will need replaced. Typically this repair would point to a system replacement but not in this situation. The Steinbergs have a major home renovation planned for early next year. When the renovation is completed there will be 700-800 additional square feet and a new HVAC plan will be needed. With this project looming it is best to repair the system at this time and plan for a complete system redesign with the home renovation project. The system was recharged with refrigerant to get by until the new compressor is available and the repair scheduled.
Repair Option arrived to perform diagnostic to begin diagnostic nothing running went inside air handler to check out 240 and 24 at transformer 240 was fine 24 V was not coming out of the transformer and explain to customer transformer need to be replaced along with board more than likely since the fuse and not catch the board got approval by customer to change board and Transformers had to pick up board from supply house in Clearwater after hours in Denver to try to change but time got away will be back tomorrow to install board no
Need to return and run new drain line and drop down from air handler due to high static pressures,Got system draining,but float switch has to be in up position,due to high static pressure,
Repair Option,need to collect. Flushed drain and cleared float switch, temperatures and pressures checked good and draining properly.
Perform diagnostic and evaluation of System operation and present Customer with multiple options for Maintenance, Repair, or Replacement of System. Completed, replaced bad thermostat,system checked good and draining properly.
Completed Performed complete maintenance on split system heat pump,cleaned coils and flushed drain, checked all electrical heat and cooling temperatures and pressures check good and draining properly. Charged 3 hours labor for extra cleaning. Added 2 lbs refrigerant for better humidity removal and sub cooling.one lb.comes with maintenance.
