New customer, blue shield plan furnace to be up, with duct inspection. Spoke with homeowner and they recently moved in over the summer and were wanting to make sure their equipment is clean and safe. Inspected ductwork, dryer, vent, and furnace. Checked evaporator coil, drain line, heat, exchanger from above. Checked blower wheel, heat, exchanger from below, heat, tape, blower, and ductwork inside plenums. Smelled a wry small gas leak at the union, and tightened and tested gas fittings to make sure no other leaks were present. Clean flame sensor, checked, inducer, draft motor, flue on 90% furnace and cleaned out drain line. Cycled furnace on and checked amps, temperature, split, gas pressure, replacing caps and static pressure. As an added courtesy, performed a quick capacitor and contactor check in outside condenser. Furnace safety and mechanical systems are all working in range at this time.! The home has 1500 cfm supply air, 1400 cfm return air, and a 3 ton system providing 120