I would highly recommend. Mike did a great job, customer friendly, and completed in an efficient timely manner.
Overall Experience
Quality
Price
Convenience
I arrived to do a diagnostic service call the system is bypassing the board so if ac is on and fan is on auto furnace does not come on. I found system to be low on charge by about a pound and filter was extremely dirty possible leak but I'm unsure. I Discussed option with customer and Customer is going to have his usual hvac company come out for installation purpose
I completed the scheduled maintenance agreement cooling tune up on a Five Star 13 SEER 2 Ton Air Conditioner. I visually inspected the unit. Checked voltages, amps and pressures. I inspected the evaporator coil. I checked the temperature difference across the coil. Inspected heat pump. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored system. All operating normally at this time.
I completed a diagnostic on a Carrier 16 SEER 2.5 Ton Air Conditioner. The filter was replaced before I arrived and I checked the system. I assumed the issue was due to a dirty filter, but the customer said the filter before was not bad. I ran the system for awhile, and everything looked fine. The system was cooling when I left.
I installed a Five Star 13 SEER 3 Ton Air Conditioner. I cycled and monitored the system and it is operational at this time.
I installed a Five Star 13 SEER 3 Ton Air Conditioner. I cycled and monitored the system and it is operational at this time.
Upon inspection, I found the blower motor, capacitor, and blower wheel needed replaced. I informed the customer and will wait to hear from them if they want to move forward.
I provided an estimate on a Five Star 96% Two-Stage 100,000 BTU Gas Furnace and a Five Star 16 SEER 3 Ton Air Conditioner. I will wait to hear from the customer on how they want to proceed.
Upon inspection, I found the flame sensor needed cleaned. I cleaned it and cycled the system to ensure everything was working properly. System is operational upon departure.
I informed the customer I would have my supervisor reach out to them with an estimate for a new system.
Upon inspection, I found the ignitor was non functional. I replaced the ignitor per customer's permission. I cycled the system to ensure functionality. System is operational upon departure.
I found the inducer motor to be making noise and starting to go bad. I oiled the inducer motor and it was operating better. I informed the customer the inducer motor is starting to go bad and to plan on replacing the part soon. System is operational upon departure.
I found the thermostat was non functioning. I replaced with customer permission and cycled the system multiple times. System is operational upon departure.
I performed a diagnostic test on a gas furnace for a customer
I installed a new Carrier 80% 70,000 BTU Gas Furnace,
