12075 NW 40th Street #6
Coral Springs, FL 33065
877-574-1738

Job Locations
for dania beach, fl


Map of Dania Beach FL
Nick G.

Nick G.


Job Checkin

1)-----Remove exsitng outdoor 100 amp disconnect and meter enclosure with mast and weather head. 2)-----Install new 200 amp meter enclosure. 3)-----Install new 2 inch rigid mast and bring mast through roof to meet code requirement for service entrance cable height. 4)-----Install new outdoor 150 amp 8/16 circuit main breaker feed thru panel. 5)-----UPDATE GROUNDING SYSTEM: includes the installation of 2 new ground rods, 1 water pipe ground and 1 low voltage ground bridge all interconnected with #4 gauge bare copper feeders. 6)-----Remove indoor 100 amp main lug circuit panel. 7)-----Install new indoor 150 amp main lug 20/40 circuit main lug panel. 8)-----Label, rough patch and clean. 9)-----Run new #1 gauge copper service feeders throughout system. (Approximately 70ft*3=210ft) 10)-----Remove old AC disconnect and replace with new 60 amp nonfuseable pullout disconnect. 11)-----Remove all devices---Switches and outlets. 12)-----Install 13 new tamper resistant outlets with cove