Completed heat Rejuvenation. Cleaned air movement system. Replaced customer supplied air filters. Replaced oil supply line parts. Checked all electrical connections. Cleaned furnace and chimney.
E09 code, problem with exhaust removal system, cleaned wheel and removed birds nests from propane tanks, cycled several times, operation normal at this time.
Returned and replaced the exhaust damper and spark electrode, rest ran in both heat and domestic hot water.
Low flame signal, removed sensor and cleaned, in addition vent damper is missing and sight glass needs to be replaced.
System running on arrival, cycled several times, no problems found.
Heating and Cooling Rejuvenation In heat mode the supply is 97 with a 67 return and 30 delta. Static pressure supply is 0.48 and return is 0.02. Voltage enhancement system on exhaust removal system is 4.8uf with a factory setting of 5uf and is within allowable fault. Blower amps 1.9 and exhaust removal amps 0.2. Cleaned air ranger and replaced media customer supplied they have 1 left. Cleaned blower. Connections and board are fine. Cleaned burners and flame sensing system. Flame sensing system read 1.2uA before cleaning and 1.8uA after. Vacuumed burner area, ignition system looks fine. Flames blue no flames rolling back. Checked heat exchanger for safety. Tested gas shut off on fuel delivery system and gas line. In cooling mode the supply is 41 with a 68 return and 27 delta. Static pressure supply is 0.45 and return is 0.3. Indoor coil clean, installed pan treatment. Cleaned drain line and EZ trap. Outdoor coil voltage enhancement system read 5/22.4 with a factory setting of 5/35
Heating and Cooling Rejuvenation In heat mode the supply is 97 with a 67 return and 30 delta. Static pressure supply is 0.48 and return is 0.02. Voltage enhancement system on exhaust removal system is 4.8uf with a factory setting of 5uf and is within allowable fault. Blower amps 1.9 and exhaust removal amps 0.2. Cleaned air ranger and replaced media customer supplied they have 1 left. Cleaned blower. Connections and board are fine. Cleaned burners and flame sensing system. Flame sensing system read 1.2uA before cleaning and 1.8uA after. Vacuumed burner area, ignition system looks fine. Flames blue no flames rolling back. Checked heat exchanger for safety. Tested gas shut off on fuel delivery system and gas line. In cooling mode the supply is 41 with a 68 return and 27 delta. Static pressure supply is 0.45 and return is 0.3. Indoor coil clean, installed pan treatment. Cleaned drain line and EZ trap. Outdoor coil voltage enhancement system read 5/22.4 with a factory setting of 5/35
Heating and Cooling Rejuvenation In heat mode the supply is 97 with a 67 return and 30 delta. Static pressure supply is 0.48 and return is 0.02. Voltage enhancement system on exhaust removal system is 4.8uf with a factory setting of 5uf and is within allowable fault. Blower amps 1.9 and exhaust removal amps 0.2. Cleaned air ranger and replaced media customer supplied they have 1 left. Cleaned blower. Connections and board are fine. Cleaned burners and flame sensing system. Flame sensing system read 1.2uA before cleaning and 1.8uA after. Vacuumed burner area, ignition system looks fine. Flames blue no flames rolling back. Checked heat exchanger for safety. Tested gas shut off on fuel delivery system and gas line. In cooling mode the supply is 41 with a 68 return and 27 delta. Static pressure supply is 0.45 and return is 0.3. Indoor coil clean, installed pan treatment. Cleaned drain line and EZ trap. Outdoor coil voltage enhancement system read 5/22.4 with a factory setting of 5/35
Heating and Cooling Rejuvenation In heat mode the supply is 97 with a 67 return and 30 delta. Static pressure supply is 0.48 and return is 0.02. Voltage enhancement system on exhaust removal system is 4.8uf with a factory setting of 5uf and is within allowable fault. Blower amps 1.9 and exhaust removal amps 0.2. Cleaned air ranger and replaced media customer supplied they have 1 left. Cleaned blower. Connections and board are fine. Cleaned burners and flame sensing system. Flame sensing system read 1.2uA before cleaning and 1.8uA after. Vacuumed burner area, ignition system looks fine. Flames blue no flames rolling back. Checked heat exchanger for safety. Tested gas shut off on fuel delivery system and gas line. In cooling mode the supply is 41 with a 68 return and 27 delta. Static pressure supply is 0.45 and return is 0.3. Indoor coil clean, installed pan treatment. Cleaned drain line and EZ trap. Outdoor coil voltage enhancement system read 5/22.4 with a factory setting of 5/35
First year inspection, checked system see photos, changed Air Ranger Media.
Installing Basic Package AC replacement 1C6A
45 wide x 25 high opening for ductwork. Installing basic package AC system. Scheduled for 4/3/20
Talk with tech support they said to remove and clean ignitor and flame sensor did as instructed found burnt wire for the flame sensor repair cycle several times tech support said to replace ignition Transformer and sensor ignitor if it happens again
