We inherited an old furnace when we bought our home. God bless him, he found a supplier and we have heat!!! Highly recommended
Response from Mr. Heating and Cooling LLC :
We are pleased to know your experience with us was a good one!
Overall Experience
Quality
Price
Convenience
Kenneth came the same day we called. He was pleasant on the phone and even more personable in person. He said we needed a thermostat after inspecting a couple of things and he would be back the next day with the new part. The next day he installed the new part and made sure everything was working properly. Great person, great service!! We will call Kenneth for our Heating&Cooling needs!
Response from Mr. Heating and Cooling LLC :
Glad your thermostat installation was a success! We appreciate the great review!
Overall Experience
Quality
Price
Convenience
I was called to a home to repair a commercial walk-in cooler that had stopped working. Upon arrival, I found that the unit was freezing up. I checked the refrigerant levels and found that they were low. I added more refrigerant and tested the unit again. The unit was still freezing up, so I checked the compressor and found that it was not running. I replaced the compressor and tested the unit again. The unit
I recently completed a job as an HVAC contractor where I installed a mini split system in a residential home. The mini split system is a type of heating and cooling system that consists of an outdoor unit and an indoor unit. The outdoor unit is connected to the indoor unit by a small pipe that carries the refrigerant. The indoor unit is installed on the wall and is connected to the ductwork. The mini split system is highly efficient and can provide heating and cooling to a single room or multiple rooms. It is also very quiet and can be controlled with a remote control. I am proud to have completed this job and to have provided my clients with a comfortable and energy-efficient home.
I was called to a home to repair a sump pump. Upon arrival, I found that the motor was bad. I replaced the motor and the sump pump was working again.
I was called to a home to repair a furnace that was not producing any heat. Upon arrival, I found that the oil furnace was not producing any heat. I diagnosed the issue as a faulty igniter and replaced it. After replacing the igniter, the furnace started working properly again. The homeowner was very happy that the furnace was working again and thanked me for my help.
HVAC installation: I recently completed the installation of a new 4-ton HVAC system for a residential customer. The job involved removing the old system, installing the new unit, and ensuring that it was properly connected to the electrical and gas lines. I also performed a thorough inspection of the system to ensure that it was operating correctly.
I was called to a home to repair a heat pump. When I arrived, I found that the heat pump was not working. I diagnosed the issue as a faulty compressor. I replaced the compressor and tested the system to ensure it was working properly. The customer was very satisfied with the work and paid me on the spot.
I am an HVAC maintenance technician. I perform routine maintenance on heating and cooling systems, including cleaning and adjusting components, replacing filters, and testing electrical systems. I also install new systems and perform emergency repairs.
hvac repair: air conditioner was blowing warm air, I arrived and repaired the unit so it's now working properly
I installed a new Heil 80,000 BTU 96% eff propane furnace with a 2-ton heat pump and matching evaporator coil. I also installed a new high-voltage line and a Honeywell digital thermostat.
I replaced the hvac coil due to a leak.
I was a part of a team that provided HVAC maintenance services to residential and commercial clients. We performed spring maintenance on heating and cooling system
I recently completed a spring HVAC tune-up at a residential property. The tune-up involved inspecting and servicing the heating and cooling systems, including the furnace, air conditioner, and ductwork. This involved cleaning or replacing air filters, lubricating moving parts, checking electrical connections, and te
I installed a Heil 3.5 ton 15 seer heat pump.