I performed maintenance on a heat pump and humidifier. I checked the system for proper operation, cleaned the coils, and adjusted the thermostat. I also replaced the air filter and checked
I installed a new Amana 2.5-ton 14-seer heat pump with a matching air handler and a 15-kw heat kit. I also provided a free Honeywell digital thermostat.
I installed a new Amana 2.5-ton 14-seer heat pump with a matching air handler and a 15-kw heat kit. I also provided a free Honeywell digital thermostat.
I was called to a home to replace an air handler. The customer had no heat. I arrived and found the air handler had failed. I replaced the air handler and the customer had heat again.
I recently completed a fall maintenance job on an HVAC system. This involved inspecting and cleaning the system's components, such as the furnace, air conditioner, and ducts, to ens
"I was called to a job where a customer reported a clogged constate line. I arrived at the job site and found that the line was completely blocked with debris. I used a plumbing snake to clear the line and then installed a new constate line. The customer was very happy with the work and thanked me for my help.
I recently completed a job installing a new Heil 2.5-ton AC unit with matching air handler, including all new ductwork in the attic and all supply lines in the ceiling. The customer also requested that I return the ductwork to the ceiling and supply high-voltage electrical work.
Responded to a no AC service call. Inspected the system and found a faulty capacitor and a clogged air filter. Replaced the capacitor with a new 45+5 MFD dual run capacitor and installed a clean air filter. Verified the refrigerant levels and ensured all electrical connections were secure. Tested the system to confirm proper cooling operation. Advised the homeowner on regular maintenance to prevent future issues.
Working on the installation of a Trane XR14 HVAC system. This involves positioning the indoor air handler, securing the outdoor condenser unit, and ensuring optimal ductwork alignment. I charged the system with R-410A refrigerant, tested for pressure integrity, and configured the digital thermostat settings for peak performance and energy efficiency. The system is now fully operational and performing efficiently.