MY PLUMBER HEATING COOLING & ELECTRICAL
MANASSAS, VA 20109
800-280-2820

Local Reviews
for cloverly, md

Rated 5.0 out of 5 stars based on 1 customer reviews

Excellent service

Nathan was polite, thorough, concerned about me as a customer. When I balked at the extremely high charge for a new kitchen faucet, he told me I could provide the faucet myself. I did so at a saving of hundreds of dollars. The information and advice he provided, his patience and excellent work were most welcome. I have only praise for Nathan but I was shocked by what I thought was excessively high cost of the job if I went with a My Plumber supplied faucet. I did not and so the cost was held down.


Response from MY PLUMBER HEATING COOLING & ELECTRICAL:

Here at My Plumber Heating and Cooling, customer feedback like this is simply priceless, thank you for the continued loyalty and support!

  • Overall Experience
  • Quality
  • Price
  • Convenience

Job Locations
for cloverly, md

BRAD C.

BRAD C. Job Checkin

Stoppage Format 1) What type of stoppage? A: The stoppage was at the bathroom sink but was only caught around the stopper in the rod 2) Where did you snake from? If yes- does it go into ceiling or basement floor? A: 3) How far did you snake? A: 4) Where did you encounter the blockage? A: 5) Did you pull anything back if so what? A: 6) What type of pipe? A: 7) On septic / sewer if septic when was it last pumped? A: 8) Where’s county/city main at? A: 9) Was the problem on or off the property? A: 10) Is a Camera Inspection Needed? If so Reason. Make sure the Homeowner/Building Owner will be present at the time of service A:


JOHN W.

JOHN W. Job Checkin

Inspected dryer vent ducting. 25’ rigid 4” ducting terminates on garage rooftop, not connected in attic. Used 4” round brush head to sweep lint from duct run and reconnected at roof terminal point. Cycled dryer, checked ducting for leaks. All conditions are ok at this time.


Brian J.

Brian J. Job Checkin

Performed semi annual maintenance and American standard gas furnace with straight Ac, check Tstat and wiring ok, filter recently changed, check heat exchanger ok , check inducer motor ,gas valve and pressure switch ok , check flame rectification system,pull and clean flame sensor, change (7.5 mf ) run capacitor , check blower motor and wheel assembly clean, bumb condensor, check standing pressures ok , system operational Supply temp # 136 Return temp # 76 Temp rise # 60 degrees


NATHAN M.

NATHAN M. Job Checkin

Customer supplied kitchen faucet install


SIMEI S.

SIMEI S. Job Checkin

Snake hallway bathroom lavatory sink.. and installed customer supplied lavatory. And clear slug upstairs bathroom lavatory sink.. NO WARRANTY ON STOPPAGE AND CLEANING SLUG ON LAVATORY DRAIN PIPE.. AND CUSTOMER SUPPLIED PARTS.