Installed a 3 ton Trane Heating and A/C System
Performed tune-up on 3 ton carrier unit
WE PERFORMED A HEATING TUNE UP ON AN ELECTRIC AIRHANDLER. EVERYTHING CHECKS OUT GREAT AT THIS TIME.
Performed heating maintenance on 4 ton system.
PERFORMED HEATING MAINTENANCE ON 3 TON SYSTEM
Arrived to find unit off and not cooling Turned the unit on and fan motor on condenser would not come on. It did not not feel locked up. checked the capacitor, it was good, checked the fan and amps checked all the Freon levels . The house was warm but now starting to cool back down.
No cool, found a loose connection on IFC board flushed down the drain line. Checked pressure, system seems to be cooling at this time.
Came out to customers home for a no cool The compressor was not running due to dropped leg on main power. The main disconnect was broken needs to be replaced, The unit now is running just fine now.
Checked all pressures, Ac tune up, changed out the filters. Made sure all the electrical work was good and tight. System is cooling just fine now.
water leaks, the drain was clogged when the tech did arrive. cut out 90 couple installed a new one, flushed out drain and added a cup of bleach. Recommended a float switch. Talked with the customer about getting a new unit.
A nose was coming from refer lines being to close to vent. Need to trim back, checked all the electrical work. Everything was working good. But need to come back