I installed a Five Star 13 SEER 2 Ton Air Conditioner and a Five Star 95% 40,000 BTU Gas Furnace 2.5T 14. The customer approved for the upgraded Carrier systems. I cycled and monitored the systems and they are operational at this time.
I went to the customer's to finish install on a Carrier 16 SEER 2.5 Ton Air Conditioner. I cycled and monitored the system and it is operational at this time.
I arrived on site to perform an installation of a Carrier 13 SEER 2.5 Ton Air Conditioner and a Five Star 80% 90,000 BTU Gas Furnace 3.5T 17", as they were the best fit for the customer home. The installation was successful and the unit was running at full functionality at the time of departure.
I arrived on site to perform an installation of a Carrier 13 SEER 2.5 Ton Air Conditioner and a Five Star 80% 90,000 BTU Gas Furnace 3.5T 17", as they were the best fit for the customer home. The installation was successful and the unit was running at full functionality at the time of departure.
I arrived on site to perform a tune up on the customers air conditioning unit. The unit was running at full functionality at the time of departure.
I arrived on site to perform a tune up on a Carrier air conditioning unit. The system was running at full functionality at the time of departure.
I arrived on site to perform a tune up the customers Air conditioning unit. Both units were running at full functionality at the time of departure.
I arrived on site to perform a tune up for a Goodman air conditioning unit. The unit was within manufacturing range and was running at full functionality upon departure.
I completed scheduled maintenance spring tune up on an air conditioner. I visually inspected the furnace. Checked voltage and amps. I inspected the evaporator coil. I checked the temperature difference across the coil. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored the system. Operating normally at this time.
