Yonas was very professional, polite, and completed the job successfully. Thank you
Very nnice gentlemen. Came to the door, we exchanged pleasantries and he proceeded to cover his work shoes before entering my house. Great personality.
The technician was able to diagnose and solve the problem with our unit that thankfully was covered under our warranty.
Daniel, the technician arrived early, completed the check up quickly and provided useful information about the care of our HVAC system.
Response from Supreme Service Today:
Thank you Michal, we're so pleased to hear back from you about how your check up went. Daniel certainly is efficient and enjoys sharing his knowledge with our customers to help them care for their system. We're looking forward to your next check up during the heating system. Have a supreme day!
I foolishly thought our thermostat was faulty; Chris' experience led him to look deeper into the situation and realize that a fuse in the furnace needed replacing. Within 20 minutes, the system was up and running. Great job
Up on arrival for no hot water on 01/29/2020. Called Denny for suggestions. Released drain for 2 seconds, hot water appeared. After 6-7 minutes it’s warm. Called state water heaters tech support found faulty upper element . Went to Schumacher &seiler got new element. Installed new part . System operating normal at this time.
Quote to install 50 gallon water heater. After install tested and works fine. Unit is on and running and no leaks were found. Bill to customer per Denny.
Quote to install 50 gallon water heater
Up on arrival performed heating annual maintenance on 01/02/2020. Checked all thermostat for operation, checked all systems for operation. Took delta T readings. Checked all electrical components. Changed all air filter and belts. Found system number 4 carrier M#48TCED14A3A6 serial # 5012G20114. Was not running. Disconnect is was set on off position thermostat wires was disconnected. I was instructed to not touch that RTU . All other systems operating normal at this time .
Installed humidifier for customer. Ran new drain line, cut out the old. Ran new wires and cut out the old. Wired in humidifier to junction box above furnace for constant power. Tommy came and helped solder couplings to remove saddle valves and he also installed Tee for humidifier. Once installed I tested and verified customer was satisfied. Sealed up old openings with sheet metal and tape. Caulked around the edge of humidifier to minimize noise. Unit operating normal.