Upon arrival customer showed me a gas furnace and ac that need to be tuned up. Could not access the evap coil. Cleaned the condensate line with nitrogen and water. Checked for proper amp and voltage. Checked the run capacitor and it is good. Went to the condenser pulled the disconnect. He led the capacitor and it was reading a little week customer denied to have a new capacitor installed because the unit is old and ready to upgrade. Checked for proper amp and voltage. The compressor had a hard start on 8t and customer said every one in a while he will need to Flip the breaker. Took a temp split and we have a Delta T of 20 degrees. Set up for Corey to come out to give an estimate on 11/1/21 between 8 and 10