7843 Conners Road
Winston, GA 30187
770-800-2665

Local Reviews
for scottdale, ga


Job Locations
for scottdale, ga

Alex S.

Alex S. Job Checkin

New 1 system CCM- Checked heating operations of 2022 Rheem furnace. Replaced 14x20x1 filter, Checked capacitor outputs and amp drawls, Inspected heat exchangers, Checked delta T, triggered safety switches, Cleaned flame sensor, Cleaned burners, and cleared drain line. System is operating properly at this time. Need 6ft ladder, pics uploaded Also added a 8” Manuel damper for the master bedroom to adjust airflow (Need to open at cooling maintenance)


Jordan E.

Jordan E. Job Checkin

Performed maintenance on two furnaces changed out to 16 x 25 by one filters cleaned flame sensors checked capacitors checked amperage on fan motors everything is running normal at this time


Jordan E.

Jordan E. Job Checkin

Performed 2 system cooling Pm replaced 16x25x1 filters. Checked electrical components as well as refrigerant charge all systems operating optimally at this time


David J.

David J. Job Checkin

Checked system operation, system operating properly. Did have to seal up system between furnace and evaporator coil with silicone. Warranty


Amber  V.

Amber V. Job Checkin

Chris was able to give this customer a free in home quote for a new system. he provided financing options as well. Chris also provided an estimate to move the furnace to the attic.


Jordan E.

Jordan E. Job Checkin

The current location of the 19 year old natural gas furnace is against code. It currently doesn’t have adequate combustible air. Which will cause excessive CO to inter the home. Due to location and age of system it is highly recommended to relocate and replace


matt@comfortsolutionsair.com

matt@comfortsolutionsair.com Job Checkin

Performed maintenance on two furnaces changed out to 16 x 25 by one filters cleaned flame sensors checked capacitors checked amperage on fan motors everything is running normal at this time


matt@comfortsolutionsair.com

matt@comfortsolutionsair.com Job Checkin

Performed maintenance on two furnaces changed out to 16 x 25 by one filters cleaned flame sensors checked capacitors checked amperage on fan motors everything is running normal at this time


matt@comfortsolutionsair.com

matt@comfortsolutionsair.com Job Checkin

Performed maintenance on two furnaces changed out to 16 x 25 by one filters cleaned flame sensors checked capacitors checked amperage on fan motors everything is running normal at this time


matt@comfortsolutionsair.com

matt@comfortsolutionsair.com Job Checkin

Performed maintenance on two furnaces changed out to 16 x 25 by one filters cleaned flame sensors checked capacitors checked amperage on fan motors everything is running normal at this time


Dylan  H.

Dylan H. Job Checkin

Residential service call completed in Scottdale Ga


Dylan  H.

Dylan H. Job Checkin

Maintenance/Tune Up completed in Scottsdale Ga


Dylan  H.

Dylan H. Job Checkin

Replaced warranty T6 thermostat


Dylan  H.

Dylan H. Job Checkin

Performed inspection on two furnaces inside attic, treated the drain line and change to 16 x 25 x 1 filters, checked all electrical components on furnaces. Performed inspection on outdoor condensing units, checked refrigerant and all electrical components, The system is clean and performing as it should at this time.


John R.

John R. Job Checkin

Quoted pricing on a new system.