Certified Generac start up. Generator is working properly.
Generator appears to run as it should. Remote/off/start switch was in the off position. Battery terminals were cleaned and properly maintained. Used the ats to start the generator remotely. While on site the generator started and ran its exercise cycle. Could not perform a test transfer due to location and not having proper key to ATS to do so without killing power. See attached pictures.
#2 service. Generator is working properly.
#1 service. Generator is working properly. Propane is very low I informed Patricia.
#1 service. Generator is working properly.
#1 service. Garage window is four 4' 9"" from generator. Asked customer to seal window. Customer will seal the window. Whip was to tight to move generator. Generator is working properly.
#1 service. Generator is working properly.
#1 service. Generator is working properly. Replaced battery and air filter during services.
#2 service. Generator is working properly. Will need a firmware update.
#2 service with oil change. Generator is working properly.
#1 service. Generator is working properly.
#2 service. House is under contract. Corinne has gave our contact information to the soon to be new owners. Denied replacing battery. 12/18. Generator is working properly.
#2 service. Generator is working properly.
#2 service. Generator is working properly.
NEGATIVE BRUSH ON HOLDER IS DAMAGED. ROTOR'S RESISTANCE IS 11.2 WHICH IS BETWEEN GENERAC'S STANDARD OF 10.25-11.92. WILL HAVE TO ORDER BRUSHES AND RETURN TO MAKE NECESSARY REPAIRS.