#2 SERIVCE. UPDATED FIRMWARE FROM 1.14 TO 1.17. REPLACED THE OIL PRESSURE SWITCH DUE TO IT LEAKING. WARRANTY IS FILED. NO FURTHER ISSUES.
#1 service. Generator is working properly.
#2 service. generator is working properly.
#1 SERVICE 50KW DIESEL WITH 1 HR LOADBANK ( OLYMPIAN )
Certified Generac install. Had to add two 20 amp circuits to the generator.
Annual service. Generator is working properly.
Annual service. Generator is working properly.
#1 service. Older Interstate battery that tested to be good. Generator is working properly.
#1 service. Updated firmware from 1.19 to 1.21. No issues.
#1 service. Generator is working properly.
Generator was shutting down when a load was applied or taken away. Replaced the Bosch Driver and Signal Conditioner. Tested generator with load and removed partial load. Generator did not fault. Generator is now working properly.
#1 service. Issue of no start was due to dead battery. Once customer installed his own battery he accidentally unplugged the mixer from the controller. Mixer being unplugged was 100% of all further issues. A new battery of proper size was installed and charging system was inspected. Charging system is operating properly. Generator has faulted in the past for RPM Sense Loss but firmware has never been updated. Firmware was updated from 1.10 to 1.15. A simulated power outage was performed and generator was allowed to power home for roughly 20 minutes without any issue. While generator was running fuel pressure was inspected and is set at 11”. Pictures have been uploaded.