I ran a piece of 1/2 pvc from main electrical panel in the garage to on the side of the house to the back of the house up to the deck. Then I cut in two customer supplied pop up plates then I ran a 20 amp circuit to the boxes and installed weather resistant GFCIs. Then I ran wires from a location above the back door to the corner of the deck. Then installed a customer supplied motion light. The other customer supplied motion light didn’t come with all the parts. Customer got another light but it was too tall and wouldn’t fit in that location. In the boat pavilion I re wired everything so it was uf cable because the existing wire was romex and not rated to be outside. Also installed weather resistant GFCIs and weather proof boxes. Also re wired all the florescent light fixtures and installed led tubes. Also installed a whole home surge protector