Complete the following work: -Sub-Panel- Wire in a 6/3 NM/B cable from the panel in the basement to the back right side of the home and set a tap a can on the house. Have the dig team dig a trench from the side of the home all the way out to the duck houses. Install a 1 1/2” pvc conduit in the ground from the tap can on the house to the a new location Nema 3 sub-panel by the duck houses. Supply and install (2) posts and the sub-panel Install a #1 Quad plex in the conduit Supply and install new GFCI breaker at the main panel for the sub-panel feed. -Duck House Wiring- For both duck houses wire in (2) new location switches for lighting with a new keyless fixture Wire in (4)-(6) new location GFCI protected receptacles, dedicated where needed. Wire in new location cameras. -Barn- Wire in a new location receptacle for the sprinkler system and move the switch down. On the outer barn wire in (2) new location lighting outlets for cameras.