Paul was very polite and arrived even earlier than he planned. Once again he was very friendly and did a very good job!
Overall Experience
Quality
Price
Convenience
Paul was extremely helpful and very knowledgeable in everything he did and carefully explained to us how every item worked and why it was important for us to have the systems in place. He has a great attitude and never completed a task without explaining what's its use and why it was needed and how important it was.
Overall Experience
Quality
Price
Convenience
12yr Hydrostatic Test Needed - Fire Extinguisher Code Deficiency: (3) 10# ABC During your most recent Fire Protection Inspection, our technicians noted that one or more of your Fire Extinguishers are due for a code-required hydrostatic test per: NFPA 10: 5.2: Dry chemical extinguishers every 12 years Disassemble extinguisher and discard old fire extinguishing agent. Inspect extinguisher cylinder for internal damage. Perform hydrostatic pressure test on cylinder. Replace all O-rings and valve stems. Upon successful hydrostatic pressure test, reassemble the extinguisher. Recharge the extinguisher with the new dry chemical extinguishing agent. Check for any leaks using leak detection agent. Fire extinguishers are required to be pressure tested using water or some other noncompressible fluid to help prevent unwanted failure or rupture of the cylinder. 6yr Maintenance Test Needed - Fire Extinguisher Code Deficiency: (1) 10# ABC During your most recent Fire Protection Inspection, our te
Portable Extinguishers and Emergency / Exit Lights Inspection
Portable Extinguishers and Emergency / Exit Lights Inspection
12yr Hydrostatic Test Due: (1) Ansul 9-Gallon System (2013 Manufacture Date) During your most recent Fire Protection Inspection, our technicians noted that one or more of your Fire Suppression Tanks are due for a hydrostatic test per: NFPA 17A: 7.5.1 The following parts of wet chemical extinguishing systems shall be subjected to hydrostatic pressure testing at intervals not exceeding 12 years: Wet Chemical Containers Auxiliary Pressure Containers Hose Assemblies Fire Suppression Tanks are required to be pressure tested using water or some other non-compressible fluid to help prevent unwanted failure or rupture of the cylinder. NFPA 17A also requires the replacement of the cartridge used to expel suppression chemical hoses, o-rings, and burst discs. The proposal below is all-inclusive and includes all parts and labor. You can accept this proposal electronically or contact me directly.
Portable Extinguishers, Emergency / Exit Lights, and Kitchen Suppression Inspection
