Would of like a call about non-compliant Tag on our Ansul system Really think you should send this out for hoods Not the best job
We have been customers for many years. Efficient and timely inspections with great followup service to keep us in compliance with regulations.
Is a good business that is consistent in fair pricing and knowledgeable technicians that are on time and leave area clean every time over the past 25 years here servicing/inspecting fire extinguishers and emergency lighting.
Cliff is very professional, well spoken and attentive to detail. He was right on point with his explanations, timing and communications. He did a great job managing the apprentices that were sent with him. A 3 day job really allows a customer to thoroughly assess the contractor and this is one of the rare occasions that I was highly impressed. The job did get delayed due to some scheduling issues which was disappointing, but I was shocked when the technician took the time to personally call and explain.
Kitchen Hood Suppression System - NON COMPLIANT Recently one of our licensed technicians was at your location to perform the service on your fire suppression system. During that inspection the following deficiencies were found on order 13742340 - Range nozzle are above back shelf and do not meet compliance due to spray pattern. Change nozzle to 2L and relocate pipe to front edge above appliance to miss shelf if agent is ever needed. Repair of these deficiencies is essential to overall life safety. Please see attached compliance quote. If you have any questions, feel free to call me. Thank you Mike McDonald 603-988-5512 Fire Suppression Repair rh2 nozzles above range are directly above the back shelf. Re pipe with F1 nozzles along the front edge of the shelf. Nozzles must be 15-30" above the range. Nozzles can be +or- 6" from the front to back center line aimed at center. (See Chris for F1 nozzles.) Deficiency: rh2 nozzles above range are directly above the back shelf. nozzles should b