I had a problem with a motorized gate that wasn't working so I called Titan Doors & Gates early in the morning. John Stadler look at the problem and took care of it in a very professional way, timely and reasonable. The job was finish to my complete satisfaction. If I have a problem again they are the ones I will call. I recommend Titan Doors & Gates to anybody. Good professionals !!
TITAN was able to diagnose the issues on this US Automatic system and resolve all the issues. In addition, we replaced the communication Receiver and programmed new remotes. Tested and all worked great again. The distance the new LiftMaster comm system works from much further distance now as well.
TITAN was able to help readjust this electric gate in Dallas so it doesn’t drag on the driveway. Sometimes that isn’t possible to change but in this instance we were able to make a difference.
Beautiful trees can be a problem when they get large and lean into a slide gate’s path. Today we had to reset the drive chain on a slide gate in Dallas that recently started hitting a tree leaning into it near the end of it’s run. It caused the chain to partially come off the gears, go into A screaming alarm and try to return to full closed position...not a good combination in this case. Because of the proximity, best to remove the tree before it causes additional damage.
Repair /adjustments needed on a huge 8’ tall slide gate with a Liftmaster Operator in Dallas TX. Debris on the track caused overload and system crash. All working in good order again.
Repairs made to a large slide gate with Cedar Board on Board. New Power Wheels and miscellaneous welding and additional chain required to get the gate setup properly.
Discovered faulty limit switch mechanism on an Elite Slide Gate operator allowing large slide gate to run off the track. Replaced and reset/adjusted the limits to properly control gate travel.
At one of the commercial facilities for a large national clients in Dallas TX.
Repaired an electric slide gate in Dallas this afternoon. Just needed a little maintenance and chain adjustment.
Checked the Control Board; although power was going into the board, it was intermittent at different locations indicating likely water damage. Dried the control board, connectors and reconnected. Power was restored but still show inconsistent readings at time. Decision was made to leave working Control Board and hopefully it will continue operating the gate.
Found the gate not working due to low power. Checked/Replaced battery, reconnected system and got it working again. Verified all remotes still worked correctly.
Repair Call in Dallas. The gate hinge post has settled and is no longer plumb (straight up & down. Will repair this situation with adjustable hinges next week.
Replaced the damaged Control Board & checked the actuator arm for damage. Reset all travel limits for the gate.
Replaced broken portion of chain for a slide gate in Dallas TX. Adjusted travel limits.
Repair on Viking K2 completed; new batteries & new close limit cam required. Re-installed chain & adjusted. Furnished/Installed/Adjusted limits. Assisted programming vehicle Home Link.