Arrived at location on 9/15/22 - Spoke with Mike about oven. Did visual inspection. Found meat probe was broken in half. Mike says he has part. Removed side panel and unplugged unit. Emptied the cavity. Removed the meat probe in oven. Inspected part he has and is incorrect. Got correct part from van. Installed new meat probe into combi oven. Reassembled the unit and plugged back in. Powered on and begun tested. Had reset all probe errors in technician menu. Set heat to probe and let heat to 150 degrees inside water in cavity. after fully heated, put thermometer in water in oven and read correctly. Unit back in service and ready for use.