There was power to the Dishwasher unit but nothing would come on. I found one of the small fuses was blown so I replaced it and when the unit went to drain I heard a pop. I disconnected the sink next to the unit so I could access the back of the unit. I found the vacuum break leaked and caused a dead short in the drain pump. I tested the other components and they all appeared to be working okay. We will need to order parts and return to repair the unit. I spoke to Jason at Insinger and he gave me the part numbers needed. The staff said I could leave the sink out and put it back in when we return. 7-24-18 - Removed the old drain pump, vacuum break, fittings, burnt terminals and pump timer and installed new. Then hooked up sink that is located next to the unit so I could turn the water back on. Then checked operation on the unit and it was running fine so I finished installing the sink. I checked for leaks and everything looked good. The unit is running fine at this time.