Have any feedback for us? We'd love to hear it! Call us at (405) 888-5253 and let us know how we are doing.
I called on Thursday evening and someone came by noon on Friday! They were professional, friendly, efficient, and priced right! Thank you!!
Kressy/Tech did great job/ very prfessional & knowledgeable giving us a quote for new ac/ heater and answering my many questions! Great Service & information and very good price quote!!
Had a new motor fail and they came out replaced promptly.
The guys at Above and beyond air-conditioning do a great job in a timely manner
Jason called, showed up on time, did a great inspection on my AC, made recommendations on preventative maintenance. Went above and beyond by testing the breaker box to make sure the AC unit wasn’t drawing to large of a load.
Jason and his employees are very knowledgeable and helpful.
Jason the owner went above and beyond to make things right. I needed a replacement unit thankfully mine was still under warranty. However the company who should have replaced my until said nothing was available until mid September. Jason called Lennox and they helped replace my unit for what I was originally quoted not asking me to pay anything more. They will have my business forever.
They got here when they said they would be here and finished when they said they would be finished. Reviewed the thermostat and showed me how to operate it.
Combustion motor not running as it should has bad bearings needs replaced new motor installed and working great Control board has a short in it causing the ticking sound Recommend replacing but customers wanna wait due to system working ok Checked home for CO 0ppm
New furnace, coil, condenser, and thermostat System comes with 10yr parts and 10yr labor warranty
OG&E Residential Tune-up on customer's home.
Sealed txv Sealed tear in line set armaflex
Installed new thermostat and lowered blower speed to help with master return noise
70/5 capacitor is out of tolerance and I recommend replacing Other than that system is cooling at 90% I didn’t have the 2-16x20x1 filters
New coil and refill of system with refrigerant Coil comes with 5yrs parts and 2yr labor Installed new coil drain properly charged system.
Sealed air leaks with mastic Can not reach back of unit to completely seal it Unit would have to be removed to seal back
Perform duct modifications and check with flow hood to ensure rooms are getting proper CFM to each room according to duct sizing. Will replace collars with dampers collars that will allow us to adjust the amount of airflow that each room is receiving Dampers 8-6†4-8†Installed take off Installed dampers cut 1 1/2 feet off liners Balanced air Office 162 cfm Master 270 cfm Master bath 108 cfm Enters 184 cfm Living 142 cfm 6 in 189 cfm 6 in Dinning 130 cfm Kitchen 159 cfm Bed 134 cfm Bedroom 106 cfm Utility 81cfm 4 in Bath 83 cfm 4in Garage entry 117 cfm
45/7.5 capacitor reading 43.94/5.38 Condenser fan amps 1.03 max per data plate is 1.20 Compressor amps 11.13 max per data plate is 19.9 Washed condenser Checked charge and temp drop Charge is perfect and temp drop is 20 degrees System is cooling to the best of its abilities
Added 12in 18/2 and 10 in peace of armor flex.
Capacitor 40/5 reading 38.75/4.81 Fan motor amps 1.07 max per data plate 1.4 Compressor amps 23.2 max per data plate is 17.9 Unit was dirty so I washed it and let it run for a few and compressor amps changed to 17.8 which is still too high, compressor is going out System is running as if it’s 100-105 degrees outside Could be low on r22 also but can’t tell because compressor is running so hot Changed filters 2-24x14x1 Condenser and coil is needed and complete system is recommended
Blower capacitor 10uf reading 9.4 out of tolerance Fan motor amps 2.35 max per data plate is 3.30 Coil leaking found leak with detector in coil Customer wants to wait it out and