No time given- Customer has no cooling. This is an R22 unit that needs refrigerant. I did add a diagnostic and explained that depending on the situation, diagnostic sometimes is taken off once a repair is approved.
Arrived onsite for heating maintenance 1 heat pump system with 1 head unit and one low profile air handler in the attic. Turn heat on and confirmed operation. Brushed and Wiped down blower cabinet. Checked electrical. Measured 46 degree heat rise. Homeowner change 14x20x1 filter. System is operating as it should. For the head unit; cleaned the washable filters and measured 46 degree temperature rise. Observed system go through defrost mode. System working as it should. Outside condenser unit. Observed proper running fan. No unusual noise. Clean coils and air flow. Observed bucket for condensate line; uncover homeowner uses it to water plants. Homeowner elected to use Elite Partner Plan. Performed annual dryer vent cleaning and annual water heater flush and inspection.
Experience a quiet, stress-free appointment with EPP 1C service for your 2-year-old unit. Customer reports loud "cricket" sounds, ensuring thorough inspection and expert solutions. Book your late morning/early afternoon appointment now for peace of mind.
Ductwork Repairs: When evaluating the client's HVAC system, I discovered restricted airflow due to a collapsed duct flex. I repaired or replaced the collapsed duct flex to restore proper airflow and system efficiency.
Detailed HVAC Tune-Up for Spring: During an extensive springtime HVAC maintenance service, I conducted a detailed AC system tune-up. This included the precise cleaning of the evaporator coil, a thorough inspection of the condensate drain, and the application of lubrication to moving parts. These meticulous steps play a crucial role in elevating the longevity and reliability of the AC unit, guaranteeing optimal performance throughout the warmer months. The homeowner is now well-prepared for the upcoming seasons with an efficiently maintained HVAC system.
Furnace Installation: Responding to a homeowner's decision to upgrade their heating system, I conducted a thorough assessment and recommended the installation of a new, high-efficiency furnace. After discussing the client's specific heating needs and preferences, we selected a furnace model that aligned with their requirements. The installation process involved careful placement, precise connection to existing ductwork, and rigorous testing to ensure optimal functionality. The new furnace now provides the client with improved heating efficiency, enhanced comfort, and the added benefit of energy savings. The homeowner can relish a cozy and efficiently heated living space, thanks to the seamless installation of their new furnace.
Annual maintenance on Energy Kinetics gas fired boiler
Annual tune up on ascent combo boiler by Energy Kinetics