I provided a homeowner with an estimate for a replacement HVAC system.
I provided a free 2nd opinion of a repair. I recommended getting the defrost board, sensor, duel capacitor, and outdoor fan motor replaced.
I recently completed a routine heating maintenance job for a client. This involved inspecting and cleaning the furnace, checking the thermostat, and replacing the air filter. I also made sure that all the vents were clear and that the system was operating efficiently. The client was very pleased with the results and expressed that they were happy with the service I provided.
I was called to perform a routine heating maintenance on a residential property. The client had noticed that their heating system was not working as efficiently as it should be, and they wanted to ensure that it was operating safely and effectively. During the maintenance visit, I inspected the heating system, including the furnace, air conditioner, and boiler. I cleaned the filters, checked the thermostat settings, and tested the safety controls. I also per
We provide routine heating maintenance services to keep your heating system running efficiently and safely. Our technicians will inspect and clean your furnace, air conditioner, and other heating components, ensuring they are operating at peak performance. We also offer preventative maintenance plans to help you avoid costly repairs and extend the life of your heating system.
I performed routine heating maintenance on a residential property. This included cleaning the furnace, checking the thermostat, and replacing the air filter. I also checked the ductwork for any leaks and made sure the vents were clear.
I installed a new Ecobee thermostat for a customer.
I received a call from a customer who was experiencing an emergency with their heating system. I arrived at their home on the weekend to diagnose the issue and provide a solution. After inspecting the system, I determined that the pressure switch needed to be replaced. I ordered the new switch and installed it the following day. The customer was very satisfied with the work and expressed that they would recommend me to their friends and family.
I performed routine heating maintenance on a residential property. I checked the furnace, thermostat, and air filters, and made any necessary adjustments. I also cleaned the vents and ducts to improve airflow. The homeowner was very pleased with the results.
Serviced American Standard Freedom 80 furnace. Cleaned flame sensor and hot surface igniter with emery cloth. Adjusted gas pressure to 3.5" W.C. using Bacharach manometer. Replaced worn draft inducer motor bearings. Tested limit switches. Verified proper combustion with Testo 310 analyzer.
Diagnosed and repaired Carrier Infinity heat pump with communication error. Traced fault using Infinity Touch diagnostic tool. Found corroded control board terminals. Cleaned connections and applied NoAlox. Replaced faulty SYSTXCCUID01-B user interface. Updated firmware. System resumed normal operation with restored communication between components.
Today, I installed a new American Standard AccuComfort Variable Speed HVAC system. The setup included mounting the indoor air handler, placing the outdoor condenser on a stable, level pad, and connecting both units with insulated copper lines. I also installed a new digital thermostat and charged the system with R-410A refrigerant to ensure peak operational efficiency and climate control.
Comfort Club heating maintenance service visit. Went through full furnace maintenance checklist on 7 year old Bryant system. Everything workingi correctly at this tie. Advised customer of indoor air quality options available.
Heating maintenance service call. Performed full furnace tune up on 3 year old Trane system. During furnace maintenance identified a problem with the igniter and corrected it so it wouldn't be an issue later.
Indoor air quality service call. Installed HVAC UV light air purifier to help improve their indoor air quality and deactivate contaminants. Walked customer through proper operation.