We had the pleasure of working with Fidel Garcia. Very knowledgeable and helpful with our service and eventual purchase. He explained everything in detail and went above and beyond with his service. We purchase and new HVAC system and waterheater based off his service. Looking forward to our new system being installed on the 18th.
The technician came out to do my first annual service, tune up on my new heat/air system and was really friendly and got along well with our Husky! He even helped reprogram my thermostat for better efficiency. I highly recommend this company!
Everyone I’ve dealt with at Huft has been wonderful
The technician was thorough, professional, knowledgeable and I believe an asset to the company he works for
Both Jet and Phong were great at explaining the questions I had
Phong Tran did a great job letting us know what to look for in the future if something goes wrong.
Excellent service. Courteous and knowledgeable. Very happy with the service.
My airconditioner is 8 years old. the technician said he needed to add 7 lbs of refrigerant and i believed him. So, the checkup went from $87 to over $1000. He then asked me if i wanted him to check for a leak. I said yes. He never told me it would cost another $300 until I got the bill. I thought it would be in the first bill. He was polite, but I was livid. I will not use Huft again.
Leak diagnosis to location leak.
Installed common wire and Ecobee smart thermostat provided by homeowner. Also Found blower capacitor is reading lower then manufacturer specifications. Blower motor has oil residue and blower wheel is dirty. Found stressed area on heat exchanger. Inducer motor is pulling more amps then manufacturer specifications. And duct work is deteriorating.
Performed sidekick maintenance. All check are within manufacturers spec and system is operating properly.
Tested and checked all components -Replaced 20x25 Filter. -High Voltage disconnect okay -25 degrees temperature rise -Tightened all low and high voltage wiring -Auxiliary Heat Strips okay, No burns -Evaporator Coil inspected for restricted air, light dust build up -Indoor Blower motor Amps 1.65A out of 1.7A Max -Relays and Sequencers okay -Defrost board working -Dual Cap 45/5uf within specs 46.61/5.13uf -Blower motor capacitor 10uf tested within specs at 10.12uf -LRA at 68A out of 79A Max -RLA OVER AMPS 18.5A over 16.7A (Compressor on last leg) -FLA 1.13A out of 1.3A Max Went over options with homeowner, Sold HVAC Replacement & Water Heater Replacement. $16k -$14k Finance -$2k due upon completion. Install date 2/18/21 $750 SMUD rebate to homeowner HVAC operational at this time. Call Complete.
Quoted Lennox High Efficiency Single Stage system. Gary is getting 5 quotes and will be making his decision in a week or two.
Performed heat maintenance on 1 year old Bosch split system heat pump. Reprogrammed thermostat for homeowner. Replaced 20x20x5 merv 11 filter with a merv 13 filter. Tightened all electrical connections. Tested all electrical components. Checked refrigerant levels. Cleaned outside unit. Wiped down air handler and heat pump. Everything is within specs. System is operational and heating at this time
Performed diagnostic. Client concerned about a clicking noise when unit turns on, I cycled system on and off 3 times, could not duplicate noise. Informed it may just be the unit settling but I went through order of operations and no issues at all. Unit is operational at this time.
Replace water main from city meter to house main, 35ft.
3 Ton Rheem $7,500 Up/Horiz. Replace existing split system with a Rheem Single Stage split system with Energy Star Condenser. Install Honeywell T6 Pro thermostat. Enlarge return air to 18†R-8 Silver-jacketed duct and a 30†X 20†High Flow Grill. Replace line-set with a 7/8†X 3/8†line-set. Replace supply plenum with a metal one. Replace condensate pan. Installation includes: Installation by HUFT Journeyman employees, all Comfort Guarantees, remove and dispose of existing equipment, Title 24 HERS certification with a third party including duct leakage test, gas flex with ball type shut off valve, electrical disconnect with properly sized fuses, perform line set flush, dispose of existing equipment, weather tight flexible whip at condenser, labor, material, taxes and permits. Rheem: RA1436WJ1NA, R801TA050314MXA, RCF3617STAMCA Efficiencies: 15.1 SEER, 80% AFUE. AHRI# 201412695 Warranty: 10 Year Parts and Compressor, 20 Year H/E, 2 Year Labor. Project Cost: $9
Customer request heating inspection service performed inspection service on Lenix heat pump system checked system operation in heating mode found system is operating properly with a 30° heat rise down refrigerant level is proper checked all safeties and connections down system is operating properly Replaced 20+25+5merv16 filter today . As per customer request input request to home office to remove PMPGOP@GMAIL.com email permanently
Abs p trap won’t fit Removed old abs p trap and replace it with chrome p trap to fit new vanity sink drain test by drain water down no evident leaks test well Warranty 1year parts and labor against leaks
Performed leak repair on Lennox split system. Repaired leak inside condenser unit, charged system with nitrogen and performed a deep vacuum. Charge system with refrigerant to manufacture spec and tested system operations. System is operational at this time.
Renewed club membership for continued maintenance and savings. Replaced hot surface igniter for proper heater function. Cycled heat, system is currently operational. Recommend replacing hvac due to age, reliability and efficiency.
Diagnostic call for no heat. Upon arrival system was non operational. Set to heat. Air handler turns on but not the heat pump. System is completely flat on charge and heat pump is locked out on low pressure. Performed UV leak dye search. Found big leak on bleeder line off of outdoor txv. Charged system up with 7 pounds of R410A per manufactures specifications and adding in for line set and evap coil. Pressures are a little out of spec still but will definitely keep the house warm until we can return to recover and charge system after welding up the leak. Will call 8nt the morning to set an Immediate follow up to finish the quoted repairs. System is operational and heating at this time