Chuc was friendly, very professional, he seemed very experienced n explained n answered all my questions. Thank you
Found unit flat. Pressure tested and found a leak on the same capillary tube that was repaired last time. Fixed leak and pulled a vacuum on system. Also added dye to system just in case there’s another leak. Charged unit to proper levels.
Found system had 0 psi in the compressor. I used nitrogen and found a leak on the section line of compressor where the capillary tube from txv welds on to the section line. I removed panels so that I can access top of suction line. I brazed the line that had a leak. Pressure tested system with 350psi of nitrogen. I vacuumed system to 500 microns. Then charged the system