They were here in less than 30 minutes, no kidding! The guy had a part with him and our air conditioner is working great again.
Response from Hurlburt Heating & Plumbing:
Thank you so much for taking the time to leave an excellent rating. We really appreciate your business.
Overall Experience
Quality
Price
Convenience
A friend recommended Hurlburt Heating & Plumbing when we needed a new furnace and air conditioner. We couldn't be happier. Andrew came out to our house and gave us a couple different options, he answered all my wifes questions and then we scheduled the installation all at the same time. 2 days later, we have a whole new central air conditioning and furnave system. Oh, and they even finaced it for 18 month with nothing out of pocket. I like using other peoples money. :)
Response from Hurlburt Heating & Plumbing:
We're thrilled to hear that you enjoyed your experience with us. Thanks for the kind words!
Overall Experience
Quality
Price
Convenience
Responded to no heat complaint in upstairs apartment. Diagnosed furnace in attic with continuously running fan but no heat production. Located and repaired loose Molex connection on control board. Tested system operation multiple times with wire movement to verify repair stability. Inspected heat exchanger - no defects found. System now operating properly with heat restored. Advised customer about potential board replacement if issue recurs.
Diagnosed furnace issue where unit was igniting but not blowing air through vents. Investigation revealed control board failure preventing power from reaching blower motor. As a temporary solution until homeowner decides on repair or replacement options, rewired fan to run continuously to provide some heat during cold weather. Recommended control board replacement or potential furnace upgrade. Service advisor scheduled to provide replacement system pricing options.
Diagnosed and resolved whistling noise issue from furnace by replacing heavily dust-laden air filter which was restricting airflow. Advised homeowner to order new replacement filters and recommended duct cleaning service due to observed debris accumulation within the ductwork.
Resolved water leakage near condensate trap on 3-year-old gas furnace by identifying the actual source was a loose hose clamp on exhaust rubber boot. Tightened clamp, ran furnace for 20 minutes to verify leak elimination. System operational with no further issues.
Diagnosed unit heater in shed not receiving call for heat signal. Jumped connection at board to verify furnace functionality. Installed new T4 Honeywell ProSeries thermostat to replace old non-functioning model. Verified proper system operation after installation. Also identified steam humidifier in main house requiring canister replacement; obtained customer approval to order replacement part.
Responded to service call for RPZ valve failure in parlour area near compressors. Upon inspection, determined that the backflow prevention device was not maintaining proper pressure through the system. Identified need for complete rebuild kit due to internal component deterioration and corrosion evident on valve assembly. Left site with recommendation for RPZ rebuild to restore proper functionality.
Performed scheduled maintenance on 6-year-old FRM furnace per agreement. System inspection revealed no issues - unit is operating properly with smooth performance. Documented electrical connections and HVAC components with photos for service record.
Diagnosed and repaired a 35-year-old Ruud furnace that was intermittently heating and shutting down prematurely. Identified malfunctioning pressure switch that was consistently clicking and opening above its setpoint as the root cause of system failure. Replaced pressure switch with new component having correct specifications, which restored reliable operation and proper heating cycle completion. System tested and verified operational.
Successfully installed a new Taco circulator pump to restore heating functionality for client's all-season porch. System is now properly circulating water through the heating loop, effectively resolving the heating issue. Verified proper operation after installation with all components functioning as designed.
Responded to no hot water complaint at customer residence. Upon inspection, found water heater with corroded copper piping and faulty gas valve previously identified in November service call. Completed installation of new electric water heater with proper electrical connections, replacing the deteriorated tank system.
Replaced heavily corroded burner assembly in furnace to restore heating function. During testing, observed intermittent gas valve operation - valve initially failed to open but subsequently functioned normally after multiple test cycles. Advised homeowner of potential future gas valve failure and discussed replacement options including possible furnace replacement if issues persist.
Performed warranty replacement of faulty gas valve and inducer motor on customer's furnace. Diagnosed system failure, installed new components, and verified proper operation after repairs. Complete system testing confirmed the heating system is now functioning to manufacturer specifications.
Performed comprehensive maintenance on dual boiler system that was heavily fouled. Thoroughly cleaned severely plugged heat exchangers requiring multiple flush cycles and mechanical clearing. Replaced gaskets and ignitors, cleaned condensate traps, and verified proper system operation. Both Weil-McLain boilers now modulating correctly after service.
Inspected hot water boiler system (5-year-old unit) after customer reported one room not heating. Diagnosed faulty electronic circulation pump - verified power supply to unit but confirmed pump was not circulating water through the affected loop. Took detailed photos of the installation and pump assembly for documentation. Informed homeowner of findings and advised replacement of the circulation pump, which will require a follow-up service call for installation once part is ordered.
Responded to customer complaint of squealing noise from a recently installed furnace. Performed diagnostic run test for 40 minutes but could not replicate the reported issue. System was functioning normally, though slight vibration was noted possibly due to the unit being hung from floor joists, which may cause intermittent duct noise. Thermostat settings and operation were verified normal. Customer advised to contact us if noise reoccurs.
