Technician arrived to perform a yearly friends and family club heat pump gas furnace maintenance on a 2019 install technician monitored refrigerant levels, defrost control, gas pressure, averages, bearing and overall health of the system. Technician found no issues mechanically with the unit that the ductwork is dirty. Homeowner would like to hold off until the spring at this time.
Arrived and completed a thorough evaluation of all plumbing inside the home. Checked all faucets for proper flow and no leaks. Checked all drains for proper draining and no leaks. Inspected all toilets for proper flush with no issues or leaks around base or tank. Inspected water heater for any signs of rust or leaks. Water heater is propane and not currently leaking.
Technician replaced the filter and inspected the humidity and insured proper operation.
For this job, Technician performed a furnace maintenance tune up on a 2 year old Amana system. Technician checked all safety devices and components that are in use during the Furnace season. Everything works great at this time.
For this job, Customer wanted to have a comment come out to give a diagnosis for the future homeowner. Technician arrived to find the outdoor fan motor not spinning but the compressor motor comes on. Technician found the system has a bad capacitor as well as the Contactor switch is in rough shape. Customer just wants to pay the 125.00 diagnostic charge.
Annual maintenance on two Goodman systems. The 2006 unit is low on r22 refrigerant and performing poorly with a 11 degree temperature differential. The newer system is running as it should here today. Technician found the p trap in the attic backed up where the condensation drains from the air conditioner. The customer said he would get up there with a snake and clean it out.
Customer declined home plumbing inspection. Customer stated whole house is newly remodeled and all fixtures are new. Recommend flushing tankless water heater but customer denied.
For this job, Technician arrived to get the balloon up of the duct work. Technician could not find the balloon maybe it made its way out. If it does make it to the coil it will not hurt anything. Technician is going to schedule a day for Clint to come out with us to find out what’s going on.
Ran new return ducts upsized to two 16in returns Strapped up supply duct work
Technician performed diagnostics with the field service rep Clint. He would like us to follow up with the customer midday to see how the system is cooling. After changes were made to figure out our next course of action.
For this job, Customer states the unit will not cool the house down in the afternoons. Technician arrived to the house at 82 degrees. Technician put the system in charge mode to find the refrigerant levels are in good shape. The static pressure of the system is reading .79 on return side and .45 on Supply side. After restarting and straightening up some ducts the static pressure came down. System is working good at this time.
Under charged and slowed down blower speed 5%
17.2 SEER2 Variable Speed Heat Pump and High Efficiency Air Handler with Two Stage Strips
Service call for a unit coming on and not running very long and losing power. Technician found the drain backed up and setting off the safety switch. The customer will clean the drain himself. The refrigerant levels are low here today but the customer wants it to stay that way.