Jason Sauer was amazing. He is very professional and a hard worker who truly cares about his customers. I am beyond pleased and would recommend Jason for anyone’s ac needs.
Branden was thorough, quickly found the issue and repaired it, thanks
Super great guy! If I could give him 10 stars I would! I will most definitely recommend him and your company! Thank you very much
I had 5 estimates done to put in a New HVAC Unit. JN Electrical had the best price and seemed more experienced at installing a new unit. These guys went all out in their job!! Even moved stuff back for me, when done. Very professional and hard working crew!! Would highly recommend them!!! Save yourself time from shopping around for estimates. If you want the job done Right, and at the Best Price around, choose JN Electrical!!!
Tappan heat pump freezing up caused by damaged controls circuitry system. Restored working operation
Payne heat pump system stopped cooling. Zoned airflow system with control voltage system short. Restored to working order & now cooling.
Installed a new YORK multistage heat pump system with YORK indoor electric furnace, merv11 air filtration cabinet, copper refrigerant lineset, new drain line with linehide, new breakers and service disconnects indoors and out, outdoor pad, insulated equipment duct and adapters to reconnect to existing branch ducting, indoor emergency drain pan with two water safety cutoff devices, and a wifi touchscreen color thermostat for the convenience of control over your phone wherever you go…!
Today we wired up some disconnects and made sure all the flex ducting was strapped properly to ensure proper airflow. We finished the day by cleaning our work area and doing some final sealing of the unit to ensure it works to its full capacity.
Installed new copper refrigerant lineset, nitrogen high pressure tested and micron vacuumed, new drain line system, linehide cover for lines to be attractive down outside of structure, connected all duct branch runs to new equipment duct, wired in low voltage and got system back online for cooling for the weekend for our wonderful customers !!
Today we hooked up all seven supply and return flexible ducting runs to supply and return air plenums. We also got everything brazed, vacuumed and set to start the air conditioning system. We then ran our drain line and filled the trap and took final diagnostic readings of the unit.
Today we extended three flex lines behind the air handler to ensure that they can reach the plenums on the unit. We also got the two plenums built and ready to be attached to the air handler.
Started a new heating and cooling project today; recovered refrigerant and removed all equipment. New outdoor heat pump set and new indoor electric furnace is in the attic. Material list and required duct drawings ready to fabricate tomorrow.
Today we arrived at the residence and performed our observation of the current system. We then disassembled and removed the old system from the residence. We then, were able to get the new air handler in the attic in its proper position and the new condensing unit on its tamped down foundation.
Install temporary loaner window AC to help stay comfortable until new high efficiency heat pump gets installed.
Completed Summer preventive maintenance and tune up on a York split heat pump system
Daikin package heat pump with refrigerant leak requiring replacement of heat pump system for safe, healthy, clean, energy efficient comfort. Clean air for the babies.
Electronic thermostat remote control capable installed to replace failed one.
Maintenance service performed on high efficiency York heat pump system delivering exceptionally safe, healthy energy efficient comfort