Upon arrival I completed a Half Install of a Five Star 13 SEER, 3.5 Ton Air Conditioner; The system is operational upon departure.
I replaced clients old system with a new Five Star 16 SEER 2 Ton Air Conditioner and a Five Star 80% 60k BTU Down-Flow Gas Furnace.
I provided an estimate on a new new air conditioner per customers request. I have her two different options with one being a 13 SEER and the other a 16 SEER.
I completed a Tune-Up and Safety Check on an infinity system. Checked amps volts and electrical components. Electric strips are good after we saw 2 did not come on. Defrost is good. Coils are good. Replaced door on air handler and system performed like it should afterwards. Heat pump checked good. Line temp is good. Door insulation was coming off. Taped down insulation. System working with no problems.
Found system sent to electric heat only on my arrival so I did explain to customer that the most efficient way to have the system set is to “system in control” , that way it will only stage in the auxiliary heat when it has to and will otherwise try to heat the house using the heat pump. Heat pump was giving me an 11° split even though it is only around 5° outside, so I explained it to the customer he will use auxiliary heat most of the time on days like today when it’s very cold but usually when the temperatures are above 20° the auxiliary heat cycles in very minimally
