I completed a Job Continuation I Removed the furnace and return drop and added box to furnace. I Moved furnace 8” forward and 6” to one side to line up furnace directly below the plenum. I Moved return drop to Coincide with the shift of the furnace. Cfm for the AC has been set to its lowest setting of 1300 cfm/50 cfm lower than it should be. Next setting was 1600 cfm and too noisy. Furnace is more quiet and the customer could tell the difference. systems operating normally at this time
CALLBACK CREATED TO MAKE QC ADJUSTMENTS- DEINSTALL AND REINSTALL FURNACE-INSTALLED RETURN AIR BASE UNDER 100,000 BTU FURNACE PER "FIVE STAR" STANDARDS. SYSTEM OPERATING NORMALLY AT THIS TIME
I completed an installation inspection on an 500 HUMIDIFIER. I completed the installation checklist. I cycled and monitored the system. The system is operating normally at this time.
I arrived on site to perform a part replacement for an in warranty Five Star 16 SEER 2.5 Ton Air Conditioner, as the unit was defunct. We replaced the unit and it was running at full functionality at the time of departure.
I completed a return service to level the pad for the customer.
After removing the Comfortmaker air conditioner, I installed a Five Star Carrier 13 SEER 3 Ton Air Conditioner. Cycled and monitored the system. Operating normally at this time. Included with the installation is a free 1 year service maintenance agreement.
I completed a diagnostic service call on a Heat pump. I determined that the unit was operating properly.
I completed an installation inspection on a Carrier 96% Two-Stage 60,000 BTU Gas Furnace. Completed installation checklist. Cycled and monitored the system. Operating normally at this time.
I completed an installation inspection on a Carrier "Infinity Series" Variable Speed 2 Ton Electric Furnace / "A" Coil and a Carrier "Infinity Series" 18 SEER Variable-Speed 2 Ton Heat Pump. Completed installation checklist. Cycled and monitored the system. Operating normally at this time.
I completed a return service for a Carrier "Infinity Series" 18 SEER Variable-Speed 2 Ton Heat Pump. I let the customer know that the unit is operating properly.
I completed scheduled maintenance spring tune up on a Carrier air conditioner. I visually inspected the furnace. Checked voltage and amps. I inspected the evaporator coil. I checked the temperature difference across the coil. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored the system. Operating normally at this time.
I completed the spring tune up on a Carrier air conditioner. I visually inspected the furnace. Checked voltage and amps. I inspected the evaporator coil. I checked the temperature difference across the coil. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored the system. Operating normally at this time.
I completed scheduled maintenance spring tune up on a Bryant air conditioner. I visually inspected the furnace. Checked voltage and amps. I inspected the evaporator coil. I checked the temperature difference across the coil. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored the system. Operating normally at this time.
I performed a tune up on a Carrier A/C unit. Everything checked out within specs. System is operational upon departure.
I completed a quote for the new compressor and coil. Homeowner to decide in next coming days.